Lincoln Electric RANGER 225 GXT Service Manual page 24

B-6
PROCESS
STICK
WIRE FEED, LN-25 WITH
INTERNAL CONTACTOR
TIG, TIG MODULE WITH
WITH CONTACTOR KIT
CONTROL CABLE, &
AMPTROL
WIRE FEED, LN-15
ACROSS the ARC
(has internal contactor)
*
When welding with MIG wire instead of self-shielded
core wire, weld starts can be improved by setting the
idle mode to "HIGH".
OPERATION
SUMMARY OF WELDING PROCESSES
CONTROL
CABLE IDLE
USED MODE
No AUTO
No AUTO
Yes HIGH
No AUTO
RANGER® 225 GXT
ELECTRODE
WHEN NOT TO START
WELDING WELDING
Hot Touch electrode to work.
Welding starts immediately
and engine goes to high
idle.
Cold Press gun trigger, LN-25
contactor closes. Welding
starts immediately and
engine goes to high idle.
Note: Output Control
must be set above "3".
Cold Press Amptrol,
contactor closes,
welding starts immediately.
Cold Press gun trigger.
LN-15 contactor closes,
Welding starts immediately
and engine goes to "HIGH"
Idle.
Note: Output Control must
be set above "3".
B-6
*
*