Lincoln Electric RANGER 225 GXT Service Manual page 85

F-45
BRUSH REMOVAL AND REPLACEMENT PROCEDURE (continued)
B r a c k e t B o l t s A s s e m b l y 7 / 1 6 " B r u s h
7/16" Brush
Assembly
Bracket Bolts
SLIP RINGS
A slight amount of darkening and wear of the slip
rings and brushes is normal. Brushes should be
inspected when a general overhaul is necessary. If
brushes are to be replaced, clean slip rings with a
fine emery paper.
TROUBLESHOOTING AND REPAIR
FIGURE F.9 – MOUNTING BOLTS
RANGER® 225 GXT
CAUTION
Do not attempt to polish slip rings while engine is
running.
F-45