Lincoln Electric RANGER 225 GXT Service Manual page 49

F-9
Observe Safety Guidelines detailed in the beginning of this manual.
PROBLEMS
(SYMPTOMS)
No constant voltage (CV) welding
output. Constant current (CC)
and the auxiliary power are
operating normally.
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely,
contact the Lincoln Electric Service Department for technical troubleshooting assistance before you proceed.
Call 1-888-935-3877.
TROUBLESHOOTING AND REPAIR
POSSIBLE AREAS OF
MISADJUSTMENT(S)
OUTPUT PROBLEMS
1. Make sure the Range Switch
(S1) is in the proper position
(CV) and "seated" correctly.
2. Make sure the wire feeder is
connected correctly.
CAUTION
RANGER® 225 GXT
RECOMMENDED
COURSE OF ACTION
1. Check the operation of the
Range Switch (S1) and check
the associated wires for loose
or faulty connections. See
Wiring Diagram.
2. Check for continuity from lead
C1 to lead W1 located in the
main stator. See Wiring
Diagram.
F-9