Intermec EasyCoder PM4i User Manual page 90

Chapter 10—Maintenance
Printhead Replacement, cont.
3
Remove any media and transfer ribbon .
5
Disconnect the printhead bracket from
the print mechanism as indicated by the
arrows and pull out the printhead as far
as the cables allow.
76
4
Pull the printhead bracket away from
the magnet in the pressure arm.
6
Disconnect the cables from the print-
head. Note the snap-lock on the inner
connector. Pull at the connectors—not
at the cables!
Intermec EasyCoder PM4i—User's Guide (IPL version)
Snap-lock