Intermec EasyCoder PM4i User Manual page 69

Setup Mode; Network (option)
(IPL v2.20)
SETUP:
These menus will only be displayed when an optional EasyLAN interface board is installed.
NETWORK
NETWORK: NETWORK:
IP SELECTION IP ADDRESS
IP SELECTION: IP ADDRESS:
DHCP+BOOTP 192.168.1.79
PARITY:
MANUAL
PARITY:
Read-only
DHCP
PARITY:
BOOTP
Intermec EasyCoder PM4i—User's Guide (IPL version)
NETWORK: NETWORK:
NETMASK DEFAULT ROUTER
NETMASK: DEFAULT ROUTER:
255.255.255.0 192.168.1.1
Read-only Read-only
Chapter 7—Setup Mode
NETWORK: NETWORK:
NAMESERVER MAC ADDRESS
NAMESERVER: MAC ADDRESS:
192.168.1.7 00104017b80e
Read-only Read-only
55