Installing The Fan Module Assembly - QUANTA STRATOS S210 Series S210-X12MS Technical Manual

I H
NSTALLING ARDWARE

Installing the Fan Module Assembly

Prerequisite: Prerequisite:
Remove the top cover. See Opening the Top Cover on
page 2-2.
1. Align the fan module assembly with the screw holes on
the chassis.
Figure 2-17. Installing Fan Module Assembly Screws
2. Secure the fan module assembly to the chassis with two
(2) screws.
3. Connect five (5) fan module cables to the connectors on
the HDD backplane.
2-12
I F M A
NSTALLING THE AN ODULE SSEMBLY