Processors; Removing A Processor - QUANTA STRATOS S210 Series S210-X12MS Technical Manual

I H
NSTALLING ARDWARE

2.9 Processors

Removing a Processor

Prerequisite: Prerequisite:
Remove the top cover. See Opening the Top Cover on
page 2-2.
Remove the CPU heatsink. See Removing a Heat Sink
on page 2-20.
1. Carefully press down and outwards on the right processor
locking lever to release it.
Figure 2-25. Releasing the Right Processor Locking
Lever
WARNING!
!
Do not try to pull the right-hand processor locking lever
fully open.
2. Carefully press down and outwards on the left processor
locking lever, pulling it fully open.
Figure 2-26. Releasing the Left Processor Locking Lever
CAUTION!
!
THE LOCKING LEVER IS HELD UNDER CONSIDERABLE
FORCE AND MAY SPRING UP UNEXPECTEDLY
2-22
P
ROCESSORS
.