Installing A Single Fan Module - QUANTA STRATOS S200 Series S200-X12TS Technical Manual

I H
NSTALLING ARDWARE
2. Release the fan module from the pin(s) and remove.
Releasing Fan Module

Installing a Single Fan Module

Prerequisite:
Remove the top cover. See Opening the Top Cover .
1. Take a note of the wind direction arrows on top of the fan
module.
Front
Wind Direction Arrows
2. Align the fan module with the pin(s) on the chassis.
3. Install the fan module to the pin(s).
Installing Fan Module
4. Connect the fan module cable.
Front
Connecting Cable
2-41
I S F M
NSTALLING A INGLE AN ODULE