Mouse Mode - QUANTA STRATOS S210 Series S210-X12MS Technical Manual

I H
NSTALLING ARDWARE
13.Click Cancel to cancel the settings and return to the Role
Group List.
To Modify Role Group
14.In the LDAP Settings Page, select the row that you wish
to modify and click Modify Role Group.
15.Make the necessary changes and click Save.
To Delete a Role Group
16.In the LDAP Settings Page, select the row that you wish
to delete and click Delete Role Group.

Mouse Mode

In MegaRAC GUI, Redirection Console handles mouse emula-
tion from local window to remote screen in either of two meth-
ods. User has to be an Administrator to configure this option.
To open Mouse Mode page, click Configuration > Mouse
Mode from the main menu. A sample screenshot of Mouse
Mode Settings Page is shown in the screenshot below.
Figure 4-20. Mouse Mode Settings Page
The fields of Mouse Mode Settings page are explained below.
Table 4-30: Mouse Mode Settings Page
I
TEM
The absolute position of the local mouse is sent
Absolute Mode
to the server.
Relative mode sends the calculated relative
Relative Mode
mouse position displacement to the server.
Save To save any changes made.
Reset To Reset the modified changes.
Procedure:
1. Choose either of the following as your requirement:
Set Mode to Absolute

Note:
Applicable for all Widnows versions, versions above RHEL6, and
versions above FC14.
Set Mode to Relative

Note:
Applicable for all Linux versions, versions above RHEL6, and ver-
sions less than FC14.
2. Click Save button to save the changes made.
3. Click Reset to reset the modified changes.
4-25
C G
ONFIGURATION ROUP
D
ESCRIPTION