Chery QQ6 Service Manual page 16

3.4. Remove the weatherproof rubber strip of
the rear door opening.
3.5. Remove the seat belt lower ornament
cover.
3.6. Unscrew the fixing nuts with a 17# sleeve,
and detach the B pillar lower trim.
Installation torque is 50±5Nm
3.7. Unclench the ornament cover on the seat
belt regulator with a flat head screwdriver.
CAUTION: Pay attention to the breakage of
clip inside the regulator.
3.8. Loosen the fixing nuts with a 17# sleeve,
and then take off the seat belt.
Installation torque is 50±5Nm
16