Removal Step - Chery QQ6 Service Manual

4. Removal Step

4.1 Open the front engine hood by hand.
4.2 Loosen the fixing bolts of front bumper
from the right and left sides of radiator cross
beam with a 10# sleeve. (The left side is taken
as an example)
Torque: 11N·m
4.3 Loosen the fixing bolts of front bumper
from the intermediate part of radiator cross
beam with a 10# sleeve.
Torque: 11N·m
4.4 Loosen two fixing bolts under the bumper
from the mud guard with a 7# sleeve.
Installation torque: 2±0.5 Nm
4.5. Unscrew mudguard fixing bolt beside the
bumper with No.7 sleeve.
Installation torque: 2±0.5N.m
42