Distance Bgp - Dell S4810 Reference Manual

To disable debugging, use the no debug ip bgp ipv4 multicast dampening
command.
Parameters
dampening
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version 8.3.11.1
Version 8.3.7.0
Version 7.8.1.0
Version 7.7.1.0
Version 7.6.1.0

distance bgp

Configure three administrative distances for routes.
S4810
Syntax
distance bgp external-distance internal-distance local-distance
To return to default values, use the no distance bgp command.
Parameters
external-
distance
internal-
distance
local-distance
Defaults
•
•
488
Enter the keyword dampening to debug route flap
dampening information.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the Z9000.
Introduced on the S4810.
Introduced on the S-Series.
Introduced on the C-Series.
Introduced IPv6 MGBP support for the E-Series.
Enter a number to assign to routes learned from a neighbor
external to the AS. The range is from 1 to 255. The default is
20.
Enter a number to assign to routes learned from a router
within the AS. The range is from 1 to 255. The default is 200.
Enter a number to assign to routes learned from networks
listed in the network command. The range is from 1 to 255.
The default is 200.
external-distance = 20
internal-distance = 200
Border Gateway Protocol