Undebug All; Virtual-Ip - Dell S4810 Reference Manual

Related ping
Commands

undebug all

Disable all debug operations on the system.
S4810
Syntax
undebug all
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version 9.0.2.0
Version
8.3.19.0
Version
8.3.12.0
Version 8.3.11.1
Version 8.1.1.0
Version 7.6.1.0
Version 7.5.1.0
E-Series

virtual-ip

Configure a virtual IP address for the active management interface. You can configure virtual addresses
both for IPv4 and IPv6 independently.
S4810
Syntax
virtual-ip {ipv4-address | ipv6-address}
To return to the default, use the no virtual-ip {ipv4-address | ipv6-
address} command.
Control and Monitoring
— tests the connectivity to a device.
Introduced on the S6000.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the Z9000.
Introduced on the E-Series ExaScale.
Introduced on the S-Series.
Introduced on the C-Series.
Original command
161