Show Ethernet Cfm Maintenance-Points Local - Dell S4810 Reference Manual

Parameters
name | level
brief
Defaults none
Command EXEC Privilege
Modes
Command
This guide is platform-specific. For command information about other platforms,
History
refer to the relevant Dell Networking OS Command Line Reference Guide.
The following is a list of the Dell Networking OS version history for this command.
Version
8.3.19.0
Version 8.3.7.0
Version 8.3.1.0
Example
Dell# show ethernet cfm domain
Domain Name: customer
Level: 7
Total Service: 1
Domain Name: My_Domain
Level: 6
Total Service: 1

show ethernet cfm maintenance-points local

Display configured MEPs and MIPs.
S4810
Syntax
show ethernet cfm maintenance-points local [mep | mip]
Parameters
mep
mip
Defaults none
Command EXEC Privilege
Modes
174
Enter the maintenance domain name or level.
Enter the keyword brief to display a summary output.
Introduced on the S4820T.
Introduced on the S4810.
Introduced on the S-Series.
Services
MA-Name VLAN
My_MA 200
Services
MA-Name VLAN
Your_MA 100
Enter the keyword mep to display configured MEPs.
Enter the keyword mip to display configured MIPs.
CC-Int X-CHK Status
10s
CC-Int X-CHK Status
10s enabled
enabled
802.1ag