Fitting The Mechanical And Digital Time Clocks - Ariston Benchmark System A 24 RFF Installation And Servicing Instructions

13. Electrical connections
13.1

Fitting the mechanical and digital time clocks

To fit the integral time clock it is necessary to proceed as
follows;
- Isolate the electical supply to the appliance;
- Remove the front panel as described in Section 18.1.1;
- Remove the plastic cover on the right hand side (Fig. 33)
and pull out the 4 wires (Fig. 34);
- Connect the time clock wires as follows;
M M
ECHANICAL ODEL
Red Wire - Contact 1
Black Wire - Contact 2
Black Wire - Contact 3
Grey Wire - Contact 5
N : T
OTE HE TWO BLACK WIRES ON
D M (Fig. 36)
IGITAL ODEL
Red Wire - Contact 1
Black Wire - Contact 2
Grey Wire - Contact 3
N : S B W
OTE ECOND LACK
- Push the clock back into the panel and refit the casing
panel (Fig. 37).
Fig. 35
G
28
(Fig. 44)
C 2 & 3
ONTACTS CAN BE REVERSED
.
IRE IS NOT CONNECTED
5 4 3 2 1
R
B
Fig. 37
(continued)
Fig. 33
Fig. 34
Fig. 36
3 1
2
G B R