Setting The Digital Clock - Ariston Benchmark System A 24 RFF Installation And Servicing Instructions

6. Setting the time clock
6.2

Setting the Digital Clock

Enter
switching
times
Imput
Operating the time switch
The steps marked with the symbol "
Preparing for Operation
Activate the "Res" switch (=RESET) to reset the time switch to its default setting (activate using a pencil or similar pointed
instrument). Do this:
- every time you wish to "reset" the time switch
- to erase all switching times and the current time of day.
After approximately two seconds the following display appears:
Enter current time and weekday
- Keep the " " button pressed down
During the summer time period press the +/- 1h button once.
Enter the hour using the "h" button
Enter the minutes using the "m" button
Enter the day using the "Day" button
1 = "Monday"..............7 = Sunday
- Release the " " button.
Manual switch
Reset
time
weekday/s
Automatic Manual
Operation Operation
= ON
= OFF
The switching If the current
times corres- switching mode is
pond to the changed manually,
program the next switching
entered. time will be
carried out auto-
matically again
according to the
entered switching
program.
" are necessary to carry out a switching program.
(continued)
Summer and
winter time
setting
Day
Enter
Continuous
Operation
= ON = Continuously ON
= OFF = Continuously OFF
You can only
return to automatic
mode from the
continuously-ON
and continuously-
OFF switching
modes by
pressing the "
key.
Enter
the hours
Week-
days
flash
Enter
minutes
"
9