Adjustments And Settings - Ariston Benchmark System A 24 RFF Installation And Servicing Instructions

Type c boilers
Table of Contents

Advertisement

17. Adjustments and settings

The boiler is delivered with pre-set values described
in menus 3 and 4.
All settings must only be changed by the installer or
a qualified person. To gain access to the setting
buttons please, open the front control panel cover
P) and follow the instructions below.
On/Off push button
DISPLAY
Pressing the, comfort, reset, menu, +, -, or setting buttons will make the display light. The light will go out 30 seconds after the
last button has been pressed.
To gain access to the setting menus press
Changing the menu :
Press the Menu button
menu
Setting a parameter in a section :
Press the
or
Note : When you arrive at the last section of a menu, pressing the
you are at the first section, pressing the
Changing section in a menu (available only for menu 3,4,5 and 6)
Press the setting button
button to select the correct value then press the setting button to select this modification and to exit the setting mode. The
3rd and 4th digit stop flashing.
Recalling the basic configuration :
Select menu 3,4,5 or 6 then press the
a while to indicate that the operation is completed.
Clearing Menu 1 (default register) :
Select menu 1 then press the
to indicate that the operation is completed.
Note : To exit install mode, press the Menu button
returns to user mode.
38
Menu button
- button
2nd digit
1st digit
and
. The menu number is displayed for 3 seconds. Press the menu button to change to the next
button to change from between sections.
button will change to the last section of the menu.
to enter the modification mode, The 3rd and 4th digits will be flashing, press the
and
and
buttons together for more than 5 seconds. The digits will flash CM for a while
Reset push button
+ button
Setting button
buttons together for 5 seconds.. Menu 1 is displayed on the 1st digit.
button will change to the the 1st section. When
:
buttons together for more than 5 seconds. The digits will flash CM for
for at least 3s. If no button is pressed for about 1 minute, the display
1 1
13 13
P
3rd digit
4th digit
or

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents