I Camera System Setup (Camera System Setup) (Only For Ps Data); I Network Setup (Network Setup) - Panasonic WJ-HD220 Operating Instructions Manual

I Camera System Setup
(CAMERA SYSTEM SETUP)
(only for PS
8 Camera Number (CAMERA No.)
The camera number assigned to the port is used when
a system controller accesses the camera.
Assignable numbers: From 1 to 128, must be unique
in the chain.
8 Compensation level (COMPENSATION)
Video signal loss can be compensated for the length of
the coaxial cable. "S" stand for short-distance, "M" for
medium, and "L" for long.
S: ≤ 500 m
M: 500 m – 900 m
L: 900 m – 1 200 m
8 Data Communication (DATA)
ON: Enables data communications by use of PSD com-
mands multiplexed on the coaxial cable.
OFF: Disables coaxial-multiplexed communications.
Click the [SET] button when all items have been set proper-
ly.
68
DATA)
•
I Network Setup (NETWORK
SETUP)
8 Line Speed (LINE SPEED)
AUTO: The speed is automatically selected.
100Mbps (FULL DUPLEX): 100 mega byte, full duplex
100Mbps (HALF DUPLEX): 100 mega byte, half
duplex
10Mbps (FULL DUPLEX): 10 mega byte, full duplex
10Mbps (HALF DUPLEX): 10 mega byte, half duplex
8 HTTP Server Port (
HTTP SERVER PORT
Enter from the keyboard. The default setting is 80.
8 DHCP On/Off (DHCP ON/OFF)
Select ON or OFF
Configuration Protocol).
IP Address (IP ADDRESS)
The IP address is displayed. Enter from the keyboard.
Netmask (NETMASK)
The netmask is displayed. Enter from the keyboard.
Default Gateway (DEFAULT GATEWAY)
The default gateway is displayed. Enter from the key-
board.
)
for DHCP (Dynamic Host