Panasonic WJ-HD220 Operating Instructions Manual page 30

R-LOWER: Displays status in the lower right corner.
R-UPPER: Displays status in the upper right corner.
L-LOWER: Displays status in the lower left corner
L-UPPER: Displays status in the upper left corner.
2. Press the JogDial (SET) to validate the selection.
3. Press the [D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.
Note: When the 9-split screen is displayed, the status posi-
tion is fixed to R-LOWER.
G Disk Capacity Warning (HDD FULL)
The recorder monitors the disk capacity to warn the opera-
tor that the available capacity is nearing its end when STOP
is selected for DISK END MODE. There are two warning
levels. First, the FULL indicator on the front panel blinks
when the remaining capacity has reached the preset value.
Finally, the buzzer beeps when the disk is full, provided that
the DISK END BUZZER parameter in the SYSTEM SETUP is
set to ON. At the same time, the FULL indicator turns on.
DISPLAY SETUP
CLOCK→ JAN15.04
TIME&DATE DISP.TYPE1 24H
TIME&DATE POSI.R-LOWER
TIME&DATE EMB. OFF
STATUS DISP.
STATUS POSI.
HDD FULL
REMOTE LED
HDD CHECK
CAMERA TITLEO
1. Select the desired value with the JogDial.
The default is 1 %.
1% - 99%: The FULL indicator blinks when the remain-
ing capacity reaches the selected value.
2. Press the JogDial (SET) to validate the selection.
3. Press the [D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.
30
11:05
ON
R-LOWER
1%
ON
0:00
G Remote LED (REMOTE LED)
The remote LED on the front panel will indicate or ignore
the remote controlled status of the recorder via the network.
DISPLAY SETUP
CLOCK→ JAN15.04
TIME&DATE DISP.TYPE1 24H
TIME&DATE POSI.R-LOWER
TIME&DATE EMB. OFF
STATUS DISP.
STATUS POSI.
HDD FULL
REMOTE LED
HDD CHECK
CAMERA TITLEO
1. Select either ON or OFF with the JogDial.
The default is OFF.
ON: REMOTE LED turns on when the network controls
the recorder.
OFF: REMOTE LED is deactivated.
2. Press the JogDial (SET) to validate the selection.
3. Press the [D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.
G Disk Check (HDD CHECK)
S.M.A.R.T. (Self-Monitoring
Technology) is activated or deactivated for HDD check.
DISPLAY SETUP
CLOCK→ JAN15.04
TIME&DATE DISP.TYPE1 24H
TIME&DATE POSI.R-LOWER
TIME&DATE EMB. OFF
STATUS DISP.
STATUS POSI.
HDD FULL
REMOTE LED
HDD CHECK
CAMERA TITLEO
1. Select either ON or OFF with the JogDial.
The default is OFF.
ON 0:00-23:00: The recorder checks the HDD at the
specified time every day.
OFF: Check is deactivated.
2. Press the JogDial (SET) to validate the selection.
3. Press the [D] or [C] button to select the next item, or
press the [SETUP/ESC] button to quit the display setup.
Note: Recording will resume after a one-second inter-
mission when HDD is checked.
11:05
ON
R-LOWER
1%
ON
0:00
Analysis and Reporting
11:05
ON
R-LOWER
1%
ON
0:00