I Language (Language) - Panasonic WJ-HD220 Operating Instructions Manual

G System Log (SYSTEM LOG)
The system log is displayed on the monitor with event num-
bers, dates, times, and causes.
SYSTEM LOG (1 OF 10)
NO.
99 FEB28.04
98 FEB28.04
97 FEB20.04 10:10:23 HD2
96 FEB15.04 23:50:42 RV1
95 FEB11.04 23:52:10 FLL
94 JAN31.04 19:43:32 TML
93 JAN30.04 19:50:14 LS1
92 JAN15.04 19:52:54 FL%
91 JAN10.04 10:40:22 TM4
90 JAN01.04 10:50:20 LS1
Abbreviation Cause
TML Thermal error
WR1
Writing error
WR2
RV1
HDD automati-
cally removed
RV2
S.M.A.R.T
HD1
detects an
HD2
error on HDD.
FL% HDD XX%
FLL HDD FULL
TM* ALM
VM* VMD
LS* LOSS
PC* PC
POW Power
ERR Error
44
DATE TIME CAU
6:50:06 WR1
5:23:51 HD1
Description
Temperature exceeds the
operating range.
Writing error on HDD
Master HDD
Slave HDD
Master HDD
Slave HDD
Warning, HDD is nearing to
the end.
HDD is FULL.
Terminal alarm event was
logged, but no picture
recorded. * = 1-8
VMD event was logged, but
no picture recorded. * = 1-8
Video input loss on channel
# (*). * = 1-8
PC alarm was logged, but
no picture recorded. * = 1-8
Power disconnection due to
electricity failure/trouble has
been detected.
Errors other than shown
above

I Language (LANGUAGE)

Language selection is available for display on the multi-
screen monitor and for HTML on the browser.
1. Move the cursor to LANGUAGE.
2. Select a language with the JogDial and press the
JogDial.
The default is ENGLISH.
Available languages: ENGLISH, FRENCH, GERMAN,
ITALIAN, SPANISH, RUSSIAN, CHINESE
Notes:
• When Russian or Chinese is selected, HTML will display
in the selected language, but the multiscreen monitor
will display in English. See the table below.
• The recorder will exit from the setup menu and automat-
ically start rebooting after you change the language.
Options Multiscreen Display
ENGLISH
FRANCAIS
DEUTSCH
ITALIANO
ESPANOL
RUSSIAN
CHINESE
HTML Display
English English
French French
German German
Italian Italian
Spanish Spanish
English Russian
English Chinese