Sms Settings - Hughes 9450 Series User Manual

SMS Settings


Using the Web UI
26
3004128-0001 Revision C
On the SMS Settings page you can configure the default settings
for messages. You must have a valid Service Center number
configured in order to send messages. The default Service
Center number is +870772001799.
On the Remote SMS Feature section you can enable the unit to
receive and act on special remote control SMS messages.
Contact your service provider for more information on this
feature. Before this feature can be enabled you must obtain the
feature activation code from your service provider and activate
the feature from the Features Web page.
You can configure the password that must be contained in
remote control SMS messages. Be sure to make a note of the
password if you change it from the default. Note: If you activate
this feature and do not change the password, it is possible that
other people may be able to send control messages to your unit.
Remote control messages will be deleted after they are received
and will not be stored in the SIM.