Using The Hughes 9450; Auto Start Configuration - Hughes 9450 Series User Manual

Using the Hughes 9450

Auto start configuration

Since the Hughes 9450 terminal is equipped with a tracking
antenna, the default configuration for the Hughes 9450 Land
Mobile Terminal is as follows:
 The Hughes 9450 is configured to automatically register
with the network by default: The terminal will automatically
attempt to register with the network once the tracking
antenna has acquired the satellite signal and obtained a GPS
fix.
 The IDU has a power switch and an ignition sense line. For
the unit to turn on, the power switch must be in the ON
position and 12V or 24V applied to the ignition sense line.
Refer to the 9450 Installation Guide P/N 3004129-0001.

Using the Hughes 9450
3004128-0001 Revision C
5