3.4 Settings page
The Settings page provides a set of subpages for the configuration of the following various terminal
parameters:
•
General Setup
IP Address/DHCP
•
Ethernet Security
•
Security
•
APN Profiles
•
•
Connection Profiles
Outbound Filters
•
Port Forwarding
•
Remote Management
•
3.4.1
General setup
This subpage allows the user to configure general parameters of the Hughes 4500 Terminal. A
description of each item is as follows:
•
Language: The user can choose between the different language options by selecting a language
from the dropdown menu and clicking the Apply Changes button.
LED Settings: The user can select between three different display options for the LED indicators
•
in normal operating mode. After selecting a new display option from the dropdown menu, the
user can confirm the setting by clicking Apply Changes.
The LED states in normal operating mode are explained in Table 2:
18
Chapter 3 • Using the Web UI
H62751 Revision C
Table 2: LED states in normal operating mode
State
Powering up
Network acquisition
Registered and IP context active
Hardware fault
LED
Solid
GREEN
Flashing
GREEN
Solid
GREEN
Solid
RED