Shock Sensor Programming (Alarm Models); Shock Sensor Adjust; Shock Sensor Bypass - Ultra Start 80 SERIES Owner's Manual

PAGE 17
SHOCK SENSOR PGM
SYSTEM PROGRAMMING - Menu 1
1 - ENTER SHOCK SENSOR ADJUSTMENT MODE
Press & HOLD Lock + Unlock buttons at the same time
+
3 CHIRPS
2 - ADJUSTING SENSOR
Each time the lock button is pressed and released the sensitivity will be
INCREASED by 1 level.
This is confirmed by a series of park light flashes & Siren Chirps
1 Flash / Chirp is the least sensitive setting
10 Flashes / Chirps is the most sensitive setting
Each time the unlock button is pressed and released the sensitivity will be
DECREASED by 1 level.
This is confirmed by a series of park light flashes & Siren Chirps
1 Flash / Chirp is the least sensitive setting
10 Flashes / Chirps is the most sensitive setting
3 - EXITING SENSOR ADJUSTMENT MODE
Press & HOLD Lock + Unlock buttons at the same time
+
(NOTE: Shock Sensor Adjustment Mode has an auto time out of
8 seconds)
SHOCK SENSOR ADJUSTMENTS (ALARM MODELS)
Continue to hold for 3-5 seconds Until Siren Chirps 3 times
(Note: System will Arm or Disarm via silent arming prior to
entering adjustment mode)
SHOCK SENSOR BYPASS (ALARM MODELS)
80 SERIES
OWNER'S MANUAL