Loading Paper Into Tray 3; Loading Paper Into Tray 4 - Konica Minolta bizhub C451 Copy Operations

Before making copies
3.5

Loading paper into tray 3

1
Pull out tray 3.
2
Lift up the paper take-up roller, and then load the paper into
the tray.
– Load the paper into the tray so that the side of the paper
to be printed on (the side facing up when the package was
unwrapped) faces up.
– Load letterhead paper so that the side to be printed on
faces down.
? How is curled paper loaded?
% Flatten the paper before loading it.
? How many sheets of paper and other media can be
loaded?
% Do not load so many sheets of plain paper that the top of
the stack is higher than the , mark.
3
Lower the paper take-up roller, and then close tray 3.
Reminder
For details on selecting the size and type of paper loaded in tray 3, refer to "Copy paper" on page 8-3.
Do not load tray 3 with paper of a size other than that previously specified.
Be careful not to touch the surface of the paper take-up roller with your hands.
Note
To change the size of paper loaded in tray 3, contact your service representative.
To print on OHP transparencies and envelopes, use the bypass tray.
bizhub C451/C550/C650
3
3-51