Konica Minolta bizhub C451 Copy Operations page 409

Application functions
4
Touch [-], [+] or [None] to specify the width to be erased.
– To specify a different width to be erased depending on the position, specify different settings for
"Top", "Left", "Right", and "Bottom".
– When using the keypad to specify the settings, press the [C] (clear) key to erase the value, and then
type in the setting.
What happens when a value outside of the allowable range is specified?
?
% The message "Input error" appears. If "Input error" appears or if the erased width was incorrectly
entered, press the [C] (clear) key in the keypad, and then specify the correct value.
5
Touch [OK].
6
Specify any other desired copy settings.
7
Using the keypad, type in the desired number of copies.
8
Press the [Start] key.
bizhub C451/C550/C650
9
9-75