Konica Minolta bizhub C451 Copy Operations page 575
Hide thumbs
Also See for bizhub C451:
- User manual (808 pages) ,
- Operation manual (304 pages) ,
- Service manual (1503 pages)
Table of Contents
Advertisement
Utility mode
–
Do Not Synchronize
This setting requires that all information be entered for user authentication and account track each
time that the machine is used.
9
Touch
The second screen is displayed.
10
Specify a setting for "When # of Jobs Reach Maximum".
–
To skip the job when the limit specified with account track is reached, touch [Skip Job].
–
To stop the machine when the limit specified with account track is reached, touch [Stop Job].
11
Specify a setting for "Number of User Counters Assigned".
–
Press the [C] (clear) key to erase the value, and then use the keypad to specify the desired value
(between 1 and 999).
–
If user authentication and account track settings have been applied, counters can be assigned to
both accounts and users, and counts for both can be totaled.
12
Touch [OK].
–
If the setting for "User Authentication" or "Account Track" was changed, the message "Are you sure
you want to clear all data?" appears.
13
Touch [Yes], and then touch [OK].
–
To stop clearing the usage data without changing the settings, touch [No].
–
If the setting for any of the following is changed, the data is not cleared. "Public User Access",
"When # of Jobs Reach Maximum", or "Synchronize User Authentication & Account Track"
–
To cancel the setting and select the default, press the [Reset] key.
The authentication method is set.
Continue by specifying settings for user authentication and account track.
Reminder
Do not differentiate between uppercase and lowercase letters in the user name for the external server.
Since the C451/C550/C650 cannot differentiate between uppercase and lowercase letters, the
operation may not be performed correctly.
Note
"Synchronize User Authentication & Account Track" appears if "User Authentication" is set to "ON
(External Server)" or "ON (MFP)" and "Account Track" is set to "ON".
If "Synchronize User Authentication & Account Track" is set to "Synchronize", even when "Public User
Access" is set to "Allow", "Public User Access" changes to "Restrict".
"Number of User Counters Assigned" appears if "User Authentication" is set to "ON (External Server)"
or "ON (MFP)" and "Account Track" is set to "ON".
If the number of user counters is set to "50", up to 950 accounts can be registered.
bizhub C451/C550/C650
.
13
13-71
Advertisement
Table of Contents
Troubleshooting
