Troubleshooting
Clearing jammed staples in Finisher FS-608
!
Detail
For details on clearing misfed paper in Finisher FS-608, refer to "Clearing a paper misfeed in Finisher
FS-608" on page 6-48.
1
Remove all paper from the finisher.
2
Open the front door.
3
Grab handle FN6, and then pull out the stacker unit.
–
Slowly pull out the stacker unit as far as possible.
4
Remove the staple cartridge holder.
–
Hold the lever on the staple cartridge holder, and then pull
the holder down to remove it.
bizhub C451/C550/C650
6
6-63