Konica Minolta bizhub C451 Copy Operations page 51

Before making copies
No. Part name
1 Main unit
2 Authentication unit (biometric type)
AU-101
3 Authentication unit (IC card type) AU-201
4 Working table WT-502
5 Fax multi line ML-501
6 Image controller IC-409
7 Large capacity unit LU-301
8 Finisher FS-517
9 Finisher FS-608
10 Punch kit PK-512
11 Punch kit PK-513
12 Finisher FS-519
13 Output tray OT-602
14 Mailbin kit MT-502
15 Saddle stitcher SD-505
16 Punch kit PK-510
17 Output tray OT-503
18 Video interface kit VI-504*
19 Fax kit FK-502*
20 Stamp unit SP-501*
21 Scan accelerator kit SA-501*
22 Security kit SC-503*
23 Local interface kit EK-602*
* Parts marked with an asterisk are internal options and therefore are not shown in the illustration.
bizhub C451/C550/C650
Description
The document is scanned by the scanner section, and the
scanned image is printed by the printer section.
Referred to as the "machine", the "main unit", or the "C451"
throughout the manual.
Performs user authentication by scanning vein patterns in the fin-
ger.
For details, refer to the manual provided with the authentication
unit (biometric type).
Performs user authentication by reading the information regis-
tered on IC cards.
For details, refer to the manual provided with the authentication
unit (IC card type).
Provides an area to temporarily place a document or other mate-
rials. This is also used when the authentication unit (biometric
type) is installed.
Installed to increase the telephone lines available for faxing.
Allows this machine to be used as both a color printer and a color
scanner configured into a computer network. For details, refer to
the corresponding user manual.
Can be loaded with up to 3,000 sheets of plain A4-size paper.
Can be loaded with the following A4-size paper: 2,500 sheets of
thick paper 1, 1,750 sheets of thick paper 1+, 1,550 sheets of
thick paper 2 or 1,300 sheets of thick paper 3.
Referred to as the "LCT" throughout the manual.
Feeds out finished printed pages. The "Sort" setting (separating
by copy set), "Group" setting (separating by page), and Staple
settings ("Corner" and "2 Positions") are available.
Feeds out finished printed pages. The "Sort" setting (separating
by copy set), "Group" setting (separating by page), Staple set-
tings ("Corner" and "2 Position"), "Half-Fold", "Center Staple &
Fold", and "Tri-Fold" are available.
Installed onto the Finisher FS-517/FS-608 to allow hole punching
to be used.
Installed onto the Finisher FS-517/FS-608 to allow hole punching
to be used.
Feeds out finished printed pages. The "Sort" setting (separating
by copy set), "Group" setting (separating by pages) and Staple
settings ("Corner" and "2 Position") are available.
Installed onto finisher FS-519 and used for separating printed
pages.
Referred to as the "optional output tray" throughout the manual.
Installed onto finisher FS-519 to divide printed pages (only with
computer printing) and feed them into the appropriate tray as-
signed to a specific individual or group.
Referred to as the "mailbin" throughout the manual.
Installed onto finisher FS-519 so that copies can be bound or
folded at the center.
Referred to as the "saddle stitcher" throughout the manual.
Installed onto finisher FS-519 to allow hole punching to be used.
Collects printed pages.
Used for connecting the image controller IC-409 to the machine.
Allows this machine to be used as a fax machine.
Applies a stamp to documents that have been scanned.
For details, refer to the User manual – Fax Operations (Option).
Creates images at high speed when sending scans.
Installed to encode the data saved on the hard disk so that the
hard disk can be used more safely.
Used for connecting the authentication unit (biometric type) and
the JScribe IC card reader/writer.
3
3-5