Lifescan ONE TOUCH Profile Blood Glucose Monitoring System Owner's Booklet page 98

3. Remove the old
batteries by gently
slapping the meter
against the palm of
your hand. Never
tap the meter
against a hard
surface.
4. Insert the new
AAA batteries into
the battery compart-
ment, being sure to
align the plus (+)
and minus (–) signs
correctly.
To replace the battery compartment
door, insert the tab on the top of the
door into the slot in the top of the
battery compartment.
Press the opening tab upward toward
the top of the meter.
Lower the battery compartment door
until it snaps shut.
Check to see that your meter is
working. If the meter fails to turn on,
the batteries may have been inserted
incorrectly. Remove the batteries and
reinsert them as illustrated.
91