Lifescan ONE TOUCH Profile Blood Glucose Monitoring System Owner's Booklet page 15

On/Off Button. This button turns the
meter on and off.
Display. This is where you read the
simple messages that guide you
through testing, setting options, and
using the memory. Your test results
will be displayed here.
M Button. The ONE TOUCH
Meter automatically stores your test
results. Use the M button to recall the
information stored in your meter's
memory and to review your meter's
option settings.
C Button. Use the C button to set the
code on the ONE TOUCH Profile
Meter and to change the meter's
option settings.
Test Strip Holder.
er holds a ONE TOUCH
place when you perform a blood glu-
cose or control solution test. It must
be removed to clean the meter.
Test Area.
under the test strip holder. There is a
clear, protective coating over the test
Profile
® ®
area that must be kept clean and
undamaged for accurate test results.
Battery Compartment.
AAA batteries. The batteries are
already installed in your meter.
Data Port.
the information stored in the meter's
memory to a computer to view,
analyze, and print. Please contact the
8
The test strip hold-
Test Strip in
®
The test area is located
Holds two
Allows you to transfer