Lifescan ONE TOUCH Profile Blood Glucose Monitoring System Owner's Booklet page 40

Step 4: Remove the Lancet.
Always be careful when removing the
lancet and PENLET
remove the PENLET II Cap. Then
grasp the two gray prongs located
near the release button, pointing the
lancet down and
away from you.
Pull back on the
dark gray sliding
barrel until the
lancet drops out.
Another way to
remove the lancet
is to put the pro-
tective disk back
on the lancet by
placing the disk
II Cap. First,
®
on a hard surface. Take the PENLET
Sampler and stick the lancet into the
protective disk.
Now carefully pull the lancet out.
Discard the used lancet in a container
for sharp objects.
33
II
®