Lifescan ONE TOUCH Profile Blood Glucose Monitoring System Owner's Booklet page 23

How to do a Check Strip Test:
Step 1: Press the On/Off Button.
Insert Side 1 of the Check Strip.
The code number will appear on the
display. When insert code 10
(Example) strip appears, slide the
notched end of the check strip into
the test strip
holder with
Side 1 (purple
side) facing up.
wait please
appears for a
moment.
Step 2: When
Appears, Remove the Check Strip
from the Test Strip Holder.
Note: This is the only time you
should remove a test strip during a
test.
M C
1
16
apply sample
M C
1