Installing The Sfp/Sfp+ Transceiver - Planet SGS-5220-24P2X User Manual

Proceed with Steps 4 and 5 of session 2.2.1 Desktop Installation to connect the network cabling and supply power to the
Step 6:
Managed Switch.

2.2.3 Installing the SFP/SFP+ Transceiver

The sections describe how to insert an SFP/SFP+ transceiver into an SFP/SFP+ slot. The SFP/SFP+ transceivers are
hot-pluggable and hot-swappable. You can plug in and out the transceiver to/from any SFP/SFP+ port without having to power
down the Managed Switch, as the

Approved PLANET SFP/SFP+ Transceivers
PLANET Managed Switch supports both single mode and multi-mode SFP/SFP+ transceiver. The following list of approved
PLANET SFP/SFP+ transceivers is correct at the time of publication:
Fast Ethernet Transceiver (100Base-X SFP)
Model Speed (Mbps)
MFB-FX
MFB-F20
MFB-F40
MFB-F60
MFB-F120
MFB-TFX
MFB-TF20
Fast Ethernet Transceiver (100Base-BX, Single Fiber Bi-Directional SFP)
Model Speed (Mbps)
MFB-FA20 100
Figure 2-2-4 shows..
Figure 2-2-4: Plug-in the SFP/SFP+ Transceiver
Connector
Interface
100 LC
100 LC
100 LC
100 LC
100 LC
100 LC
100 LC
Connector
Fiber Mode
Interface
WDM(LC) Single Mode
User's Manual of SGS-5220 Series
Fiber Mode Distance
Multi Mode 2km
Single Mode 20km
Single Mode 40km
Single Mode 60km
Single Mode 120km
Multi Mode 2km
Single Mode 20km
Distance Wavelength (TX) Wavelength (RX) Operating Temp.
20km 1310nm
30
Wavelength (nm) Operating Temp.
0 ~ 60 ℃
1310nm
0 ~ 60 ℃
1310nm
0 ~ 60 ℃
1310nm
0 ~ 60 ℃
1310nm
0 ~ 60 ℃
1550nm
-40 ~ 75 ℃
1310nm
-40 ~ 75 ℃
1550nm
0 ~ 60 ℃
1550nm