Stack Configuration - Planet SGS-5220-24P2X User Manual

4.19.2 Stack Configuration

This page is used for configure the stack, include assign Switch ID, master priority and display the current stack member
information. The screen in Figure
The page includes the following fields:
Object

Delete

Stack Member

Switch ID
4-19-6appears.
Figure 4-19-6 Stack Configuration page screenshot
Description
Deletes this switch from the stack configuration.
The MAC address of the switch.
The Switch ID (1-16) assigned to a switch. For more information, see description
of Switch IDs
Assigning and Swapping Switch IDs
When a switch is added to the stack, a Switch ID is automatically assigned to the
switch. The automatic SID assignment can be modified by choosing a different
Switch ID on the Stack Configuration page. This method allows Switch IDs to be
assigned so that it is easier for the user to remember the ID of each switch.
The Switch IDs of two switches can be swapped by simply interchanging the
values in the Switch ID column. Changing Switch IDs does not result in any
interruption of the stack operation.
Removing a Switch From the Stack
When a switch is removed from the stack, the configuration for the switch is
preserved, and the switch still appears on the Stack Configuration page. If the
configuration of the switch is not to be transferred to another switch, then the
configuration may be deleted by choosing Delete, followed by "Save".
Replacing a Switch
If a switch is to be replaced with another switch (for example, replacing failing
hardware), the following procedure must be used to assign the configuration of
the failing switch to the new hardware:
1. Remove the failing switch from the stack. For example, assume that the
User's Manual of SGS-5220 Series
342