Port Tag Remarking - Planet SGS-5220-24P2X User Manual

Weight
 Queue Scheduler
Percent
 Port Shaper Enable
 Port Shaper Rate

Port Shaper Unit
Buttons
: Click to apply changes
: Click to undo any changes made locally and revert to previously saved values.
: Click to undo any changes made locally and return to the previous Page.

4.9.6 Port Tag Remarking

This Page provides an overview of QoS Egress Port Tag Remarking for all switch ports. The Port Tag Remarking screen in
Figure 4-9-6 appears.
This value is restricted to 1-100. This parameter is only shown if "Scheduler
Mode" is set to "Weighted".
The default value is "17".
Shows the weight in percent for this queue. This parameter is only shown if
"Scheduler Mode" is set to "Weighted".
Controls whether the port shaper is enabled for this switch port.
Controls the rate for the port shaper.
This value is restricted to 100-1000000 when the "Unit" is "kbps", and it is
restricted to 1-13200 when the "Unit" is "Mbps".
The default value is 500.
Controls the unit of measure for the port shaper rate as "kbps" or "Mbps".
The default value is "kbps".
Figure 4-9-6: QoS Egress Port Tag Remarking Page Screenshot
User's Manual of SGS-5220 Series
184