Poi Navigation; Adding Your Current Location As A Point Of Interest - Suunto AMBIT2 User Manual

TIP: You can also check your location while you are recording an exercise by
keeping [Next] pressed to access the options menu.

8.3 POI navigation

8.3.1 Adding your current location as a point of interest (POI)
Suunto Ambit2 allows you to save your current location as a POI. You can
navigate to a saved POI anytime, for example, during your exercise.
You can store up to 100 POIs in the device. Note that also routes take up this
quota. For example, if you have a route with 60 waypoints, you can additionally
store 40 POIs in the device.
You can select a POI type (icon) and POI name from a pre-defined list, or freely
name the POIs in Movescount. The pre-defined icons are listed in Chapter 16
Icons on page 113.
To save your current location as a POI:
1. Press [Start Stop] to enter the start menu.
2. Scroll to
NAVIGATION
3. Press [Next] to select Location.
4. The device starts searching for a GPS signal and displays GPS found after
acquiring the signal. Your current coordinates are now shown on the display.
5. Press [Start Stop] to save the location.
6. Select a suitable POI type for the location. Scroll through the POI types with
[Start Stop] or [Light Lock]. Select a POI type with [Next].
7. Select a suitable name for the location. Scroll through the name options
with [Start Stop] or [Light Lock]. Select a name with [Next].
8. Press [Start Stop] to save the POI.
using [Start Stop] and enter with [Next].
en
31