P2 Cards - Panasonic AJ-HPX3700G Operating Instructions Manual

!"#$%&'())*#+,-.+/012345677899'.9:;<99=>>?@A>BACDEFGDEHIJKL?M
Recording and Playback
Inserting P2 Cards
#Note
When using the unit for the first time, be sure to set the time
data beforehand. On how the time data is set, see [Setting
Time Data] (page 63).
1
Turn on the POWER switch.
a
a. POWER: [ON]
2
While pressing down the slide lock button, slide the
slide-out door to the left.
The door opens.
b. Slide lock button
c. Slide-out door

P2 Cards

b
c
3
Insert a P2 card into the P2 card slot until the eject
button pops up.
d. Eject button
e. The card must be inserted with the logo right way up.
4
Tilt up the popped-up eject button.
f. P2 card access LED
5
The P2 card access LED indicates the status of P2 card
in the slot.
For how the P2 card status is indicated, see [P2 card
access LED and status of P2 cards] (page 32).
6
Close the slide-out door.
#Note
Do not leave the slide-out door open when moving unit.
Recording and Playback: P2 Cards
d
e
f
31