Basic shooting operations (continued)
Checking photos taken (REC CHECK)
In the shooting pause mode, press the REC
CHECK button.
This plays back about 2 seconds of the video and
audio of the most recently recorded clip before
returning to pause mode.
•
make backup recordings.
•
and MCR mode.
The HD recording(720P/60P) settings are
current settings, see page 41.)
P2 card access lamps
CAM mode (MCR)
Lights green:
Data can be saved onto the cards or loaded
from them.
Blinks green (slow):
protected
Lights orange:
Slot that is the object of recording
Blinks orange:
Blinks orange (fast):
Both lamps blink orange:
Ejection of card during access
Off:
Cards have not been inserted or formatted.
Insertion of incompatible card.
PC mode (USB DEVICE)
Blinks orange:
Off:
PC mode (1394 DEVICE)
Blinks orange: Connected
Off: Not connected
26
PC mode (1394 HOST)
Lights green:
Access standby.
Blinks orange:
Off:
Cards have not been inserted or formatted.
Insertion of incompatible card.
P2 card access lamp
Protecting against a possible erasure
[PROTECT].
Write-protect switch
PROTECT
Formatting P2 cards
1
Set the POWER switch to ON. (Page 19)
2
Press the mode button and set it to MCR
mode (the MCR lamp lights).
•
Thumbnails are displayed.