Panasonic AJ-HPX3700G Operating Instructions Manual page 45

!"#$%&'())*#+,-.+/012345677899OP9:;<99=>>?@A>BACDEFGDEHIJKL?M
For continuous recording
Press either the REC START button or VTR button at the
lens, again. Interval recording resumes.
To stop recording
Press the STOP button. Recording stops. Then, the camera
accesses the P2 card to record the video stored in memory
before recording stops. The record from the beginning of the
interval recording to the moment of pressing the STOP
button is generated as one clip.
Shooting procedures for the ONE SHOT mode of INTERVAL REC
After setting the INTERVAL REC mode, follow these steps:
1
Following basic operations of shooting and recording
according to [Basic Procedures], lock the camera
securely.
2
Press either the REC START button or VTR button at
the lens.
The unit automatically goes into ONE SHOT pause
mode after the specified REC TIME.
To check the previous recording during a pause
Press the RET button at the lens to put the unit into REC
REVIEW mode. ONE SHOT operation continues after the
REC REVIEW.
To divide clips or to change the P2 card used for
recording
Even during ONE SHOT mode, clips will not be generated
on the P2 card until the STOP button is pressed. Press the
STOP button, and stop ONE SHOT mode operation.
iREC start
Real-time video/
sound
Content on P2 card
Previous clip
To stop the Interval recording mode
" Setting the menu option INTERVAL REC MODE to "OFF".
When INTERVAL REC HOLD is set to "OFF", the mode
returns to ordinary recording mode if the POWER switch of
the unit is turned off.
If INTERVAL REC HOLD is set to "ON", the interval
recording mode will not change even if the POWER switch is
turned off.
3
Performs recording for the duration specified under the
REC TIME option by pressing either the REC START
button or VTR button at the lens, and returns to ONE
SHOT pause mode.
4
Press the STOP button.
The video and sound stored in memory are generated
as one clip.
Time Axis
iREC
start
A B
REC TIME
t t
(Recording time=t)
A B
One clip
To stop the ONE SHOT mode of INTERVAL REC
" Set the menu option INTERVAL REC MODE to "OFF".
When INTERVAL REC HOLD is set to "OFF", the mode
returns to ordinary recording mode if the POWER switch of
the unit is turned off.
If INTERVAL REC HOLD is set to "ON", the interval
recording mode will not change even if the POWER switch is
turned off.
Recording and Playback: Interval Recording
STOP button
45