Option Menu - Panasonic AJ-HPX3700G Operating Instructions Manual

!"#$%&'())*#+,-.+/012345677899N)/9:;<99=>>?@A>BACDEFGDEHIJKL?M

OPTION MENU

The ____ in the Adjustable Range column indicates the preset mode.
OPTION
Items/ Adjustable
Data Saved Range
ENG SECURITY ON
OFF
– – – – –
FRAME RATE FRM RATE
UB MENU
– C – – –
AUDIO OUT DELAYED
DELAY THROUGH
– C – – –
FAN MODE OFF
AUTO
– – – – –
RATE SET AT ON
REC OFF
– C U F –
206
Menu: Menu Description Tables
Remarks
Select whether or not to prohibit opening
the menu screen.
ON: Menu screen cannot be opened.
Please consult your distributor to
release the setting.
OFF: Menu screen can be opened.
For setting the user bits to record when
the video system is set to 24P or 24PA.
For details, refer to [Recording time code
and user bits] (page 64).
FRM RATE:
For recording the shooting
information (frame rate etc.) of
the camera.
MENU: This follows the settings in the
UB MODE item and the VITC UB
MODE item of <TC/UB> screen.
However, the camera shooting
information is always recorded
when recording in native mode.
Select whether or not to delay audio,
headphone and speaker outputs.
DELAYED:
Delay audio output in
synchronization with video
output.
THROUGH:
Output audio input without delay.
This setting prevents echo effect
between the sound source and
audio output when the sound
source is near the unit.
For setting the operation mode of the fan
OFF: The fan always stops.
AUTO: The fan will run automatically
when the temperature in the unit
increases.
#Note
Once the power is turned off, this will
always be set to "AUTO" whenever the
power is turned on. If the unit is operated
as the fan stops, the temperature in the
unit will increase, and data may not
record or play back properly. Use the unit
after setting this item to "AUTO" for
normal operation.
For setting if the frame rate can be
changed or not during VFR recording.
ON: Frame rate can be changed.
OFF: Frame rate cannot be changed.
#Note
Audio while recording VFR will not be
recorded onto the P2 card regardless of
the frame rate setting when this is set to
"ON".
AREA SETTING
Items/ Adjustable
Data Saved Range
AREA SELECT NTSC NTSC: Selects an NTSC area outside
NTSC (J)
PAL
NTSC (J):
PAL:
– – – – –
!AREA SET – For changing the area setting selected
using AREA SELECT. For more details
about settings used in different areas,
refer to [Color TV Standard Settings
(Settings for frame frequency)]
(page 14).
– – – – –
Remarks
Japan.
Selects Japan.
Selects a PAL area.