Rgb 4:4:4 Output And P-10Log Settings - Panasonic AJ-HPX3700G Operating Instructions Manual

!"#$%&'())*#+,-.+/012345677899..N9:;<99=>>?@A>BACDEFGDEHIJKL?M

RGB 4:4:4 Output and P-10LOG Settings

This unit can output signals suitable for Digital-Intermediate,
which is a film production workflow.
RGB 4:4:4 Output and P-10LOG Settings
Link A signal is output from the HD SDI A connector and
Link B signal is output from the HD SDI B connector by
performing the cinematograph setting, and it is possible to
set these signals as P-10LOG for RGB 4:4:4 output. For
cinematograph settings, see page 109 and later.
Refer to the following procedures to set the above without
using the cinematograph setting.
1
Open the <GAMMA> screen from the PAINT page with
menu operation.
2
Select GAMMA MODE SEL using the JOG dial button,
and press the JOG dial button.
3
Turn the JOG dial button and select "FILM-REC", then
press the JOG dial button.
4
Open <OUTPUT SEL> screen from SYSTEM SETTING
page with menu operation.
5
Select SIGNAL FORMAT using the JOG dial button, and
press the JOG dial button.
6
Turn the JOG dial button and select "4:4:4", then press
the JOG dial button.
7
Select P-10LOG using the JOG dial button, and press
the JOG dial button.
8
Turn the JOG dial button and select "ON", then press
the JOG dial button.
9
Press the MENU button to complete the menu
operation.
112
Adjustments and Settings for Recording: RGB 4:4:4 Output and P-10LOG Settings
#Notes
" Recording to the P2 card and MON OUT signal will be
YP P 4:2:2 even if the signal is set to P-10LOG for RGB
B R
4:4:4.
" If you select "ON" in P-10LOG setting, 2D-CMS will
operate in accordance with P-10LOG as well.
Example of Digital Cinema Recording
Film camera
#
Equipment to convert
film to digital data
Convert
# film to
data
Hard disk recorder, etc.
Color grating process
Film recording
Film print
Screening
Transition Chart of FILM-REC Gamma to P-
10LOG
VIDEO-REC
100
50
30
0
1000
500
-1 stop
-2 stop
-3 stop
-4 stop
-5 stop
0
-6 -5 -4 -3 -2 -1
AJ-HPX3700G
#
#
#
#
#
FILM-REC
NORMAL
18% GRAY
+4 stop
+3 stop
+2 stop
P-10LOG
+1 stop
Normal
0 1 2 3 4 5 6