Panasonic AJ-HPX3700G Operating Instructions Manual page 79

!"#$%&'())*#+,-.+/012345677899(Q9:;<99=>>?@A>BACDEFGDEHIJKL?M
Information Item
8. Battery type (when
MODE CHECK is
being performed)
9. Battery remaining
level/voltage
10. MODE CHECK
Indication Area
(STATUS: Master gain)
(Cause of !LED
illumination: displayed full-
screen)
" Indications selected
through the menu
option !LED are marked
with [ ! ].
" Indications which may
activate the !LED are
marked with [ ].
(FUNCTION: HD SDI A ·
B)
(FUNCTION: MON OUT)
(FUNCTION: P2CARD
STATUS)
(AUDIO: Enabling or
disabling the FRONT
AUDIO LEVEL control)
(AUDIO: Phantom power
status for the microphone)
(AUDIO: Input signal and
level for each channel)
Indication
PRO14 - AC ADPT
''.'V
'''%
EMP
MAX
LOW/MID/HIGH
–3 to 30
GAIN (0dB)
SHUTTER
WHITE PRE.
EXTENDER
B.GAMMA
MATRIX
COLOR COR.
FILTER
OUTPUT: MEM/CAM/OFF
TYPE: 4:2:2/4:4:4
CHAR: A/B/BOTH
OUTPUT: MEM/CAM/OFF
SELECT: VBS/HD SDI
CHAR: ON/OFF
TOTAL
SLOT1/SLOT2/SLOT3/
SLOT4/SLOT5
OP-SLOT
CH1: ON/OFF
CH2: ON/OFF
FRONT: ON/OFF
REAR: ON/OFF
FRONT/W.L./REAR
CH1/2/3/4
Battery type, selected through a menu option. "AC ADPT" indicates when an
external DC power supply has been input.
Battery remaining level in tenths of a volt
The battery level of batteries having a level indicating function is displayed as a
percentage.
Where the battery has a level indicating function, this indicates that the battery
is empty.
Where the battery has a level indicating function, this indicates that the battery
is fully charged.
Value set for the master gain
Example: LOW: 0
Gain status
Shutter status
White balance status
Extender status (EX2 or OFF)
BLACK GAMMA status (ON or OFF)
MATRIX status (A, B, or OFF)
Color correction status (ON or OFF)
Filter status
Position of OUTPUT SEL switch.
Indicates current setting of SIGNAL FORMAT.
SIGNAL FORMAT is selected in the <OUTPUT SEL> screen of the SYSTEM
SETTING page.
Indicates current setting of HD SDI A · B CHAR.
HD SDI A · B CHAR is set from the <OUTPUT SEL> screen of the SYSTEM
SETTING page.
Position of OUTPUT SEL switch.
Indicates current setting of MONITOR OUT.
MONITOR OUT is set from the <OUTPUT SEL> screen of the SYSTEM
SETTING page.
Indicates current setting of MON OUT CHARACTER switch.
Total remaining free space/capacities of the P2 cards loaded in P2 card slots
1 - 5.
Status and remaining free space/capacity of each card. The numbers denote
the P2 card slot numbers.
The card status is indicated as:
ACTIVE/ACCESSING/INFO READING/FULL/PROTECTED/
NOT SUPPORTED/FORMAT ERROR/NO CARD/PROXY
For details of statuses, see [P2 card access LED and status of P2 cards]
(page 32).
Indicates optional slot status.
The card status is indicated as:
PROXY/NO CARD/NOT SUPPORTED
If the FRONT AUDIO LEVEL control is in effect for channel 1, then "ON" is
indicated. If not, "OFF" is indicated.
If the FRONT AUDIO LEVEL control is in effect for channel 2, then "ON" is
indicated. If not, "OFF" is indicated.
Phantom power status of the front microphone
Phantom power status of the rear microphone
For more information, see [MIC/AUDIO2] (page 199).
Input signal and level for each channel
Adjustments and Settings for Recording: Viewfinder Screen Status Displays
Status
79