For Windows Vista Users - Konica Minolta bizhub 131f User Manual

Installation
2.1.4

For Windows Vista users

Note
Make sure that you followed the installation steps 1 to 11 on page 2-3.
1
Plug the USB cable into your machine and then connect it to your com-
puter.
Note
Be sure to use a shielded USB cable. Use of an unshielded cable may re-
sult in radio interference.
2
Turn your machine on.
3
The driver software will be installed automatically.
4
When the drivers have been installed correctly, the message "Your de-
vices are ready to use" will appear.
Note
After the driver installation, you need to configure the "Device Option"
setting to activate either or both the 2nd Paper Cassette or/and Duplex
Unit (The Duplex Unit is available only for 190f.) See "Activating your de-
vice option(s)" on page 2-12 for instructions on how to do this.
131f/190f PCL driver
2
2-11