Using The Picture-In-Picture (Pip)/Picture-By-Picture (Pbp) Function; Using The Sleep Timer - BenQ DV3250 User Manual

Using the Picture-in-Picture (PIP)/Picture-by-Picture (PBP) Function

Using the Sleep Timer

20 Using the Remote Control
If your display is connected to an additional Video or PC source,
pressing the PIP/PBP button allows you to display both images
on the screen at once in PIP (Picture In Picture) or PBP (Picture
By Picture) modes:
• Full Screen: Normal display.
• PIP G on V: Enter PIP mode and display graphics in video.
• PIP V on G: Enter PIP mode and display video in graphics.
• PBP G by V: Enter PBP mode and display graphics by video.
• PBP V by G: Enter PBP mode and display video by graphics.
V (video)= TV, AV1, AV1-RGB, AV2, AV2-S, AV3, AV3-S, AV4,
AV4-S input image. G (Graphics)= Component 1, Component
2, PC or DVI input image.
1. Press the (Sleep timer) button on your remote control to set
the automatic sleep timer.
2. Press the button again to increase the time interval. Time is set
in increments of 30 minutes, from 0 to 180 minutes.