Table of Contents
Advertisement
Connecting Composite (AV) Video Signal (SCART)
Connect the AV1 or AV2 (SCART) input
terminal on the TV to the SCART terminal on
the AV equipment using a SCART cable.
Connecting S-Video Signals
1. Connect the S-Video output of your AV
equipment to the display's S-VIDEO terminal
using an S-Video cable. Pay attention to the
direction of the connector on the S-Video
cable when inserting.
2. Connect the audio output of your AV
equipment to the display's S-VIDEO AUDIO
L/R input terminals using the AV cable or
equivalent.
An S-video signal provides a higher quality
image to that of Composite video. It is
recommended to use this input whenever
possible. If your AV equipment provides a
component video output (YP
this should be used in preference to either
composite or S-video signals.
DVD player
P
or YC
C
),
B
R
B
R
SCART cable
S-Video cable
Audio (AV) cable
DVD player
Setting up Your Display
9
Advertisement
Table of Contents
