Video Source Selection In Pip/Pbp Mode (For Models With Pip/Pbp Function) - BenQ PD3200Q User Manual

Working with two computers and one monitor
1. Establish cable connection as
instructed in Connect the PC
video cable on page
1. Select an input source.
2. Select KVM switch.
Working with two computers and two monitors
Video cable
PC 1
1. Establish cable connection as instructed in
2. Select KVM switch.
Working in PBP mode (selected models only)
1. Establish cable connection as
instructed in Connect the PC
video cable on page
2. Enable PBP function from
>
Display PIP/PBP
. See
Mode > PBP
source selection in PIP/PBP
mode (for models with
PIP/PBP function) on page 37
for more information.
3. Select KVM switch.
Video source selection in PIP/PBP mode (for models with
PIP/PBP function)
Your monitor scans for the available video sources in the following order: HDMI, DP, and mini
DP, and displays the first available one. This video source will become the main source in
PIP/PBP mode. You will need to decide the second source for PIP/PBP mode from the menu in
PIP/PBP source on page
Video cable
14.
PC 1
PC 1
Video cable
14.
>
Video
PC 1
41. Menu options that are not available will become grayed out.
PC 1 / PC 2
PC 2
USB cable (type A to type B)
Connect the PC video cable on page
PC 1 PC 2
Video cable
PC 2
Video cable
PC 2
14.
Video cable
PC 2
How to adjust your monitor 37