Setting Up Your Display; Connecting The Antenna; Connecting Catv; Antenna - BenQ DV3250 User Manual

Hide thumbs Also See for DV3250:

Table of Contents

Setting up Your Display

Your DV3250 LCD Display has an internal 75 ohm coaxial cable connector, so antennal hook-up

is very easy.When connecting a 75-ohm coaxial cable, secure it firmly to the antenna connector.

Some cable TV companies provide "pay per view" programming. Since the signal for these paid

channels is encoded, most cable TV companies provide their own tuners/ decoders. You must

install a tuner/ decoder to be able to view locked encoded programming. If you require special

instructions on how to install cable service, please contact your cable TV provider. The tuner/

decoder provided by your cable TV company can be used according to the following

instructions.

You must have an RF switch with two inputs (A and B).

The "A" input on the RF switch allows you to use the display's Channel /

unlocked channels. The "B" input on the RF switch allows you to use the channel selection

button on your cable box to view locked encoded programming via the tuner/decoder.

The antenna equipment has far more effect on reception for color TVs than on black and white

models. We suggest you use a good-quality outdoor antenna. Following are simple explanations

for the connection of various types of antennas.

1. Generally speaking, 75 ohm systems have a

round cable with a BNL connector which

requires no tools. Attach the cable directly to

the input.

2. 300 ohm systems have a flat "dual lead" type

cable. A 300-75 ohm transformer may be

used to attach the antenna to a 75 ohm

input.

For best reception it is recommended that an Outdoor antenna be used.

A: Use a combination VHF/UHF outdoor antenna.

B: Use separate VHF and/or UHF outdoor antennas.

buttons to view

Setting up Your Display

Table of Contents