Connecting The Power Cord; Initial Setup - BenQ DV3250 User Manual

Connecting the Power Cord

1. Connect the female end of the AC power cord to the AC input on the display.
2. As shown in the diagram, connect the male end to a wall power outlet.
• The figure above shows the power cord connection. The shape of the physical power cord plug
and socket will differ depending on the location where you purchased the display.
• This product must be operated only from the type of power source indicated on the marking
label (AC 100~240V 50/60 Hz).
• If the display will not be used for a long period of time, it should be unplugged from the wall
outlet.

Initial Setup

1. Check to make sure that all connections to your display are correct and firm.
2. Press the Power button on the display. The display will turn on. The following First Turn On
screen will appear.
3. Press the Volume or Volume
and then press the Channel
4. Press the Volume or Volume
the Channel
5. (Optional) If Others is selected in Country, press the Volume or Volume
display to select a TV broadcast standard.
6. Press the Channel
INPUT button. The display will start searching for available channels and store them in the
memory. This may take several minutes, depending on the available TV channels of your local
TV system.
7. Press the MENU button on the display to close the menu.
12 Setting up Your Display
buttons on the display to select a screen display language,
button on the display to go to the next step.
buttons on the display to select your country, and then press
button on the display to go to the next step.
button on the display to select Auto Installation and then press the
Power Cord
Power outlet
buttons on the