Table of Contents
Advertisement
Adjusting Aspect Ratio
Press the
/
(Screen aspect ratio) button on your remote
control to select the image aspect ratio you prefer.
Press the button several times to cycle through various ratios.
• Full Screen - Enlarge the standard 4:3 video signal
(e.g. TV signal) to 16:9 full screen video signal.
When the original input video source is 16:9 in
ratio (e.g. DVD signal), no change will occur.
• 4:3 - Display the standard 4:3 video signal (e.g.
TV signal) in the center of the screen at the ratio
of 4:3. The screen does not change, but black
blocks appears in the left and right sides of the
screen. When the input video source is 16:9 in
ratio, deformation will occur on the screen.
• Letterbox -Fill the entire 4:3 screen with a 4:3
video signal. The redundant part on the upper and
bottom of the image will be removed and the
image will extend vertically and horizontally to fill
the full screen. When the input video source is
16:9 in ratio (e.g. DVD signal), no change will
occur.
• Anamorphic - Fill the entire screen with a 4:3
video signal. Some deformations may be
identified on the edge of the image. When the
input video source is 16:9 in ratio (e.g. DVD
signal), no change will occur.
• Real - Display the actual size of the video source
without zooming.
Using the Remote Control
19
Advertisement
Table of Contents
